Peggy Pepper 2221 - 4 6000KV - powered by Scorpion - with Micro Edition 5:1N
with flat and inject (hollow-bored shaft = greasing without spinner dismantling) 6000 rpm - the hottest series Peggy ever. Only for specialists. Extremely powerful, light drive for hotliners to 1,5 mtrs. Optimal for 2-3 lipo cells, Short-term performances to over 1500 watts possible. Catapult-like acceleration and speed over 300 km/h. Caution: Not without props on 3s! Note rpm limit of props! Data: Weight 114g Diameter 28mm Lenght without shaft 55mm 6000 rpm, 6 pole 1200 rpm Gear shaft: 6mm CAUTION: 3,5 mm gold connectors are only for continuous current 50A and short-term 70A for 10 sec. permitted ! Drive data: 2s - 7,4V - 10x17 CFK M28, 7716 rpm, 53 amp. 390 watts, pitchspeed 200 km/h, Eta 78,7% 2s - 7,4V - 11x22 GM M35, 7076 rpm, 81 amp. 602 watts, pitchspeed 237 km/h, Eta 75,1% - 7 sec. 2s - 7,4V - 12x17 CFK M28, 6982 rpm, 86 amp. 633 watts, pitchspeed 181 km/h, Eta 74,4% 2s - 7,4V - 12,8x13 CFK M28, 7429 rpm, 65 amp. 484 watts, pitchspeed 147 km/h, Eta 77,5% - 10 sec. 2s - 7,4V - 13x9 CFK M28, 7800 rpm, 49 amp. 361 watts, pitchspeed 107 km/h, Eta 78,9% - 5-6 sec. 2s - 7,4V - 15x16 CFK M28, 6403 rpm, 111 amp. 825 watts, pitchspeed 181 km/h, Eta 69,3% - 4 sec. 3s - 11V - 10x13 CFK M28, 11208 rpm, 85 amp. 944 watts, pitchspeed 222 km/h, Eta 77,3% - 6 sec. 3s - 11V - 10x17 CFK M28, 10837 rpm, 101 amp. 1118 watts, pitchspeed 281 km/h, Eta 76% - 5 sec. 3s - 11V - 11x22 GM M35, 9703 rpm, 150 amp. 1665 watts, pitchspeed 325 km/h, Eta 70% - 3-4 sec. 3s - 11V - 12x17 CFK M28, 9547 rpm, 157 amp. 1742 watst, pitchspeed 247 km/h, Eta 69% - 3-4 sec. 3s - 11V - 12,8x13 CFK M28, 10313 rpm, 123 amp. 1368 watts, pitchspeed 204 km/h, Eta 73,5% - 4-5 sec. 3s - 11V - 13x9 CFK M28, 10997 rpm, 94 amp. 1043 watts, pitchspeed 151 km/h, Eta 76,6% - 5-6 sec. NOTE: calculated thrust values Clamp middle piece Spinner caps Prop-Gums Spantpad GFK motor spant Reisenauer wrench for Micro Edition Gears Optional accessories: • 4-plus high performance grease– Link. • Wrench 17-2mm for Micro EDITION flange– Link. • Wire-Protection cable protection for narrow hulls– Link. Customers who bought this product have also bought:
|