SunriseModel ICE 150A 7,4V brushless controller

For helicopters and model planes.

SunriseModel brushless controllers are manufactured at our requirements and the highest quality standards. All controllers are re-checked at our premises before shipment to ensure maximum functional warranty. Upon request, the controller are programmed for your application.

Data:
Constant Current: 150A
Max Current: 170A for 10 seconds
Input Voltage: 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery
BEC: yes, Switch BEC
BEC Output: 7.4V/6A
PWM: 8-16 KHz
PCB Size: 50mm*30mm
Weight: 93g
without Cable: 49g

Max RPM at Inhouse Benchmarktest by 2-Poler Brushless-Motor:
Timing 0° - 169.750 rpm
Timing 6° - 189.000 rpm
Timing 12° - 192.150 rpm
Timing 18° - 198.000 rpm
Timing 24° - 223.125 rpm
Timing 30° - 223.650 rpm

Details:
• Super fine and smooth touch of speed controlling, first-rate accurate linearity
• Soft Start-up mode and Constant RPM mode (Governor mode)
• adjustable F3A brake.
• 3 steps adjustable regular back EMF brake.
• High capability of anti-interference
• Low-voltage cut-off protection for per cell battery
• Under-voltage cutoff
• Under-voltage can be disabled
• Under-voltage with automatic adjustment for NiCd/NiMH/Li-Ion/LiPo/LiFePO4
• Variable cutoff voltage / cell
• Slow down instead of cutoff
• Active freewheeling circuit
• LED status display
• Timing of motor ranges from 0° to 30°
• Blocked rotation protection
• Over-temperature protection and Overload alarm
• Anti sparkling circuit: reduces connection sparkles(for HV ESC)
• Throttle signal lose protection. When the signal loses for 3 seconds, the power will automatically cut off.
• Safe power-on. The motor won’t start no matter which position the throttle stick is when battery connected

Note:
This controller is also available with the SunriseModel ICE ProgCard II programming card to change and set parameters easily and conveniently. – Link.

Customers who bought this product have also bought: