Peggy Pepper - Series: TWENTY-FIVE HK 2524-2410KV 8 pole with Micro Edition 5:1N 4plus Inject
with flat and inject (hollow-bored shaft = greasing without spinner dismantling)

According to latest research developed motor with superior performance and maximum efficiency.

Ultra compact and very light.


Data:
Weight: 162g
Poles: 8
Motor Ø: 31,5,0mm
Length:726mm without shaft + shaft 17mm
shaft Ø: 6,0 mm
Bolt circle: 25mm, 4xM3
Lipo: 2-5s, (6s only with controller, field speeds above 220,000 possible)
rpm/V: 501 measrued with timing 12°
power max.: 70 Amp.
max. performance: on 11,1V 770 Watt, on 14,8V 950 Watt, on 18,5V 1250W
Timing: 12°
clock frequency: 8-12khz

Drive data:

3s - 11,1V - 17x10, GM Scale M38, 4999 rpm, 37 Amp. 411 Watt, Schub 2465g, Pitchspeed 76 km/h, Eta 83,2%
3s - 11,1V - 17x13, GM Scale M38, 4769 rpm, 51 Amp. 570 Watt, Schub 2646g, Pitchspeed 94 km/h, Eta 81,2%
3s - 11,1V - 18x10 Schulze M39, 5019 rpm, 36 Amp. 398 Watt, Schub 2580g, Pitchspeed 76 km/h, Eta 83,3%
3s - 11,1V - 18x10, GM Scale M38, 4880 rpm, 44 Amp. 493 Watt, Schub 2957g, Pitchspeed 74 km/h, Eta 82,4%
3s - 11,1V - 18x13, GM Scale M38, 4766 rpm, 51 Amp. 572 Watt, Schub 2835g, Pitchspeed 94 km/h, Eta 81,2%
3s - 11,1V - 19x13, GM Scale M38, 4630 rpm, 60 Amp. 667 Watt, Schub 3298g, Pitchspeed 92 km/h, Eta 79,6%

4s - 14,8V - 15x10, GM Scale M37, 6617 rpm, 43 Amp. 633 Watt, Schub 2870g, Pitchspeed 101 km/h, Eta 84,5%
4s - 14,8V - 15x13, GM Scale M37, 6374 rpm, 58 Amp. 853 Watt, Schub 3035g, Pitchspeed 126 km/h, Eta 83,0%
4s - 14,8V - 16x8, GM Scale M37, 6628 rpm, 42 Amp. 622 Watt, Schub 3422g, Pitchspeed 81 km/h, Eta 84,5%
4s - 14,8V - 16x10, GM M38, 6563 rpm, 46 Amp. 681 Watt, Schub 3245g, Pitchspeed 100 km/h, Eta 84,3%
4s - 14,8V - 16x10, GM Scale M38, 6449 rpm, 53 Amp. 784 Watt, Schub 3544g, Pitchspeed 98 km/h, Eta 83,6%
4s - 14,8V - 16x16 RF M28 schmal, 6339 rpm, 67 Amp. 997 Watt, Pitchspeed 155 km/h, Eta 81,3%
4s - 14,8V - 17x8 GM M38, 6650 rpm, 41 Amp. 603 Watt, Schub 3599g, Pitchspeed 81 km/h, Eta 84,6%
4s - 14,8V - 17x10 GM M38, 6449 rpm, 53 Amp. 784 Watt, Schub 3804g, Pitchspeed 98 km/h, Eta 83,6%
4s - 14,8V - 17x10, GM Scale M38, 6374 rpm, 58 Amp. 853 Watt, Schub 4004g, Pitchspeed 97 km/h, Eta 83,0%
4s - 14,8V - 17x13 GM M38, 6213 rpm, 68 Amp. 1001 Watt, Schub 3861g, Pitchspeed 123 km/h, Eta 81,5%
4s - 14,8V - 18x8,5 GM M38, 6507 rpm, 50 Amp. 732 Watt, Schub 4224g, Pitchspeed 84 km/h, Eta 83,9%
4s - 14,8V - 18x8,5 GM Scale M38, 6309 rpm, 62 Amp. 912 Watt, Schub 4833g, Pitchspeed 82 km/h, Eta 82,4%
4s - 14,8V - 18x10 GM M43, 6343 rpm, 60 Amp. 882 Watt, Schub 5575g, Pitchspeed 97 km/h, Eta 82,7%
4s - 14,8V - 18x10 Schulze M39, 6372 rpm, 58 Amp. 855 Watt, Schub 5334g, Pitchspeed 97 km/h, Eta 83,0%
4s - 14,8V - 19x10 GM M38, 6133 rpm, 73 Amp. 1075 Watt, Schub 5220g, Pitchspeed 93 km/h, Eta 80,7%

5s - 18,5V - 14x10 GM F M38, 8345 rpm, 45 Amp. 828 Watt, Schub 3162g, Pitchspeed 127 km/h, Eta 84,3%
5s - 18,5V - 15x8 GM M36, 8411 rpm, 41 Amp. 760 Watt, Schub 4882g, Pitchspeed 103 km/h, Eta 84,3%
5s - 18,5V - 15x10 GM Scale M37, 8030 rpm, 62 Amp. 1150 Watt, Schub 4228g, Pitchspeed 122 km/h, Eta 83,1%
5s - 18,5V - 15x16 RF M37, 7927 rpm, 81 Amp. 1504 Watt, Pitchspeed 193 km/h, Eta 81,4%

5s - 18,5V - 16x8 GM M38, 8336 rpm, 45 Amp. 836 Watt, Schub 4158g, Pitchspeed 102 km/h, Eta 84,3%
5s - 18,5V - 16x8 GM Scale M37, 8047 rpm, 61 Amp. 1133 Watt, Schub 5048g, Pitchspeed 98 km/h, Eta 83,2%
5s - 18,5V - 17x8 GM M38, 8082 rpm, 59 Amp. 1097 Watt, Schub 5312g, Pitchspeed 99 km/h, Eta 83,4%

6s - 22,2V - 14x10 GM F M38, 8345 rpm, 63 Amp. 1401 Watt, Schub 4479g, Pitchspeed 151 km/h, Eta 83,9%

NOTE: calculated thrust values

Caution: For powers over 1000 watts we recommend the Micro-Edition 5:1N 4plus gear!

Clamp middle piece

Spinner caps

Prop-Gums

Spantpad

GFK motor spant

Reisenauer wrench for Micro Edition Gears


Optional accessories:
• 4-plus high performance grease– Link.
• Wrench 17-2mm for Micro EDITION flange– Link.
• Wire-Protection cable protection for narrow hulls– Link.

Information on product safety:

Manufacturer:
Scorpion Precision Industry (H.K.) Co. Ltd.
16F, Excelsior Bldg., 67-76 Sha Tsui Rd., Tsuen Wan, N.T.., Hong Kong

Contact information/Importer:
REISENAUER PRÄZISIONSANTRIEBE
Monika Reisenauer
Hochfellnstr. 68
D-83346 Bergen
www.reisenauer.de

Land of origin: China

Customers who bought this product have also bought: