Tenshock EDF 1540-6T 4pol 3400KV with Micro Edition 5:1N/T
with flat und inject (hollow bored shaft = regreasing without spinner disassembly)

Small diameter - maximum performance.
Versatile, powerful 4-pole internal rotor. Drive for sailors and hotliners from 1.7 to 4 meters wingspan.

Data:
Weight: 205g
Pole: 4
Motor Ø: 28,0mm
Motor lenght: 85mm without shaft + shaft 17mm
Shaft Ø: 6mm
Hole circle: 14mm, 3xM2,5
Lipo: 2-4
rpm/V: 719 measured with timing 6°
Electricity max.: 100 amps
max. power: at 4S 1600 watts, an 3S 1100 watts
Timing: 6-10°
Frequenzy: 8-12khz

Our drive data:
Best ETA on 11 V, 25 amps, 83,3%
Best ETA on 14,8 V, 28 amps, 82,8%
Ideal application range 15-45 amps.

Switch-on times:
Typical for sailors under consideration of outside temperature and effective cooling.

Drive data at standstill:
3s - 11V - 15x8, 7236 rpm, 48 Amp. 533 Watt, Schub 3153g, Pitchspeed 88 km/h, Eta 82,8%
3s - 11V - 15x10, 6921 rpm, 67 Amp. 745 Watt, Schub 3457g, Pitchspeed 105 km/h, Eta 80,9%
3s - 11V - 15x16 schmal M28, 6814 rpm, 74 Amp. 817 Watt, Pitchspeed 166 km/h, Eta 80% - 20 Sek.
3s - 11V - 16x8, 7033 rpm, 60 Amp. 670 Watt, Schub 3647g, Pitchspeed 86 km/h, Eta 81,7%
3s - 11V - 16x10, 6576 rpm, 88 Amp. 976 Watt, Schub 3837g, Pitchspeed 100 km/h, Eta 77,8% - 15 Sek.
3s - 11V - 16x16 M28 schmal, 6417 rpm, 98 Amp. 1083 Watt, Pitchspeed 156 km/h, Eta 76,2% - 10 Sek.
3s - 11V - 17x8, 6971 rpm, 64 Amp. 711 Watt, Schub 4338g, Pitchspeed 85 km/h, Eta 81,3%
3s - 11V - 17x9, 6740 rpm, 78 Amp. 867 Watt, Schub 4484g, Pitchspeed 92 km/h, Eta 79,4% - 15 Sek.
3s - 11V - 18x8,5 GM M35, 6817 rpm, 73 Amp. 814 Watt, Schub 5387g, Pitchspeed 88 km/h, Eta 80%

4s - 14,8V - 11x22 GM M35, 9359 rpm, 81 Amp. 1207 Watt, Pitchspeed 314 km/h, Eta 82,2% - 15 Sek.
4s - 14,8V - 12x17 RF M28, 9277 rpm, 86 Amp. 1280 Watt, Pitchspeed 240 km/h, Eta 81,7% - 15 Sek.
4s - 14,8V - 12,8x13 RF M39, 9393 rpm, 80 Amp. 1176 Watt, Pitchspeed 186 km/h, Eta 82,4%-15 Sek.
4s - 14,8V - 14x8 RF M28, 9209 rpm, 91 Amp. 1341 Watt, Schub 4007g, Pitch 112 km/h, Eta 81,3% - 12 Sek.
4s - 14,8V - 14x10RF M29, 8898 rpm, 109 Amp. 1619 Watt, Schub 5578g, Pitch 136 km/h, Eta 79,2%-8 Sek.
4s - 14,8V - 15x16 schmal M28, 8733 rpm, 119 Amp. 1767 Watt, Pitchspeed 213 km/h, Eta 77,9% - 6 Sek.
4s - 14,8V - 16x10 GM RF32V° M22, 9171 rpm, 93 Amp. 1375 Watt, Pitchspeed 140 km/h, Eta 81,0% - 12 Sek


NOTE: shear values calculated.

Caution: For powers over 1000 watts we recommend the Micro-Edition 5:1N 4plus gear!

Optional accessories:
• 4-plus high performance grease– Link.
• Wrench 17-2mm for Micro EDITION flange– Link.

Customers who bought this product have also bought: