Leopard LC250-30 6pole 3670KV with Micro Edition 5:1NL/T
with flat and inject (hollow-bored shaft = greasing without spinner dismantling)

Very light and powerful drive
especially for
RES and F5J gliders of 1,4 - 3,80m
and small speeders.

Data:
weight 65g without plugs
diameter 24,6mm
length without shaft 52mm
733 rpm/V
6 poles
hole circle 14mm, 3xM2,5
for 2-4 lipos
current max 35 amp.
max. performance on 3s 400 watts
max. performance on 4s 550 watts
timing 6-12°
8khz
Gear shaft: 6mm

On our test bench:

Best ETA at 11 V, 13 amp., 79,1%
Best ETA at 14,8 V, 21 amp., 80,7%
Ideal operating range 15-30 amp.

Switch-on times:
typical for gliders,
under consideration of outside temperature
and effective cooling.

Drive data in stand:

2s - 7,4V - 11x22 GM CFK, 4434 rpm, 18 amp. 137 watts, VPitch 149 km/h, Eta 76,9%
2s - 7,4V - 13x11 Ae, 4531 rpm, 17 amp. 124 watts, thrust 1006g, VPitch 76 km/h, Eta 78%
2s - 7,4V - 15x10 Ae, 4134 rpm, 24 amp. 177 watts, thrust 1234g, VPitch 63 km/h, Eta 72,7%
2s - 7,4V - 16x8 GM F5J M25, 4533 rpm, 17 amp. 124 watts, thrust 1396g, VPitch 55 km/h, Eta 78,1%
2s - 7,4V - 16x10 GM F5J M25, 4264 rpm, 22 amp. 160 watts, thrust 1130g, VPitch 65 km/h, Eta 74,6%
2s - 7,4V - 18x8,5 GM F5J M25, 4035 rpm, 26 amp. 190 watts, thrust 1887g, VPitch 52 km/h, Eta 71,1%

10V - Lipos with less capacity e.g. 400-1300mAh.

3s - 10V - 12x8 RF F5J thin M25, 6569 rpm, 15 amp. 147 watts, VPitch 80 km/h, Eta 81%
3s - 10V - 14x7 GM F5J M25, 6290 rpm, 20 amp. 196 watts, VPitch 67 km/h, Eta 79,6%
3s - 10V - 16x8 GM F5J M25, 5843 rpm, 27 amp. 274 watts, VPitch 71 km/h, Eta 75,6%
3s - 10V - 16x10 GM F5J M25, 5435 rpm, 35 amp. 347 watts, VPitch 83 km/h, Eta 71,1%

3s - 11,1V - 10x8 RF M25, 7400 rpm, 14 amp. 159 watts, VPitch 90 km/h, Eta 81,2%
3s - 11,1V - 11x22 GM CFK, 6190 rpm, 36 amp. 395 watts, VPitch 208 km/h, Eta 72,7%
3s - 11,1V - 12x8 RF F5J thin M25, 7215 rpm, 17 amp. 195 watts, VPitch 88 km/h, Eta 80,9%
3s - 11,1V - 14x7 GM F5J CFK, 6886 rpm, 23 amp. 259 watts, VPitch 73 km/h, Eta 79%
3s - 11,1V - 14x8 RF F5J thin M25, 6803 rpm, 25 amp. 275 watts, VPitch 83 km/h, Eta 78,4%
3s - 11,1V - 16x8 GM F5J M25, 6366 rpm, 32,5 amp. 360 watts, thrust 2752g, VPitch 78 km/h, Eta 74,5%
3s - 11,1V - 17x7 GM F5J M25, 6106 rpm, 37 amp. 411 watts, thrust 2543g, VPitch 65 km/h, Eta 71,9%
3s - 11,1V - 16x10 GM F5J M25, 5898 rpm, 41 amp. 452 watts, thrust 2263g, VPitch 90 km/h, Eta 69,7%

4s - 14,8V - 9x21,5 GM CFK M35, 8501 rpm, 41 amp. 604 watts, VPitch 279 km/h, Eta 74,5%
4s - 14,8V - 10x8 RF CFK M24, 9540 rpm, 23 amp. 344 watts, thrust 1557, VPitch 116 km/h, Eta 80,3%
4s - 14,8V - 10x13 RF CFK M28, 9046 rpm, 31 amp. 466 watts, VPitch 179 km/h, Eta 78,1%
4s - 14,8V - 10x17 RF CFK M28, 8711 rpm, 37 amp. 551 watts, VPitch 226 km/h, Eta 75,9%

4s - 14,8V - 12x8 RF F5J thin M25, 9241 rpm, 28 amp. 418 watts, VPitch 113km/h, Eta 79,1%
4s - 14,8V - 14x7 GM F5J thin M25, 8728 rpm, 37 amp. 546 watts, VPitch 93km/h, Eta 76,1%
4s - 14,8V - 14x8 RF F5J thin M25, 8599 rpm, 39 amp. 579 watts, VPitch 105km/h, Eta 75,2% - 25sec.

NOTE: calculated thrust values


Optional accessories:
• 4-plus high performance grease– Link.
• Wrench 17-2mm for Micro EDITION flange– Link.

Customers who bought this product have also bought: