Tenshock EDF 2230-12T-1690KV + Micro Edition 5:1N 4plus
with flat und inject (hollow bored shaft = regreasing without spinner disassembly)

Very powerful 6-pole internal rotor drive especially suitable for glider models and hotliners.

Data:
Weight: 267g
Pole: 6
Ø: 36,0mm
Length: 80mm without shaft + shaft 18mm
shaft Ø: 6,0 mm
Hole circle: 25mm, 4xM3
Lipos: 3-8s
rpm/V: 339 measured with timing 6°
Electricity max.: 62Amp.
max.power: on 14,8V 950 Watt, on 18,5V 1150 Watt, on 22,2V 1375 Watt, on 30V 1860 Watt
Timing: 6-10°
Frequency: 8-12khz

On our test bench:

Best ETA at 14,8 Volt, 20-25 Amp. 85,4%
Best ETA at 18,5 Volt, 24-30 Amp. 86,1%
Best ETA at 22,2 Volt, 26-34 Amp. 86,5%
Best ETA at 30,0 Volt, 35-42 Amp. 87,2%

Ideal operating range 30-60 Amp.

Switch-on times:
Typical for sailors under consideration of outside temperature and effective cooling.

Drive data in stand:

11,1V - 22x14 GM CFK M36, 3140 rpm, 34 Amp. 382 Watt, VPitch 67 km/h, Eta 80,1%

14,8V - 20x13 GM CFK M37, 4266 rpm, 42 Amp. 616 Watt, VPitch 85 km/h, Eta 81,8%
14,8V - 22x14 GM CFK M36, 4008 rpm, 55 Amp. 820 Watt, VPitch 86 km/h, Eta 77,7%

18,5V - 17x13 GM VV° M38, 5596 rpm, 38 Amp. 702 Watt, VPitch 111 km/h, Eta 84,9%
18,5V - 17x13 GM Scale VV° M38, 5464 rpm, 45 Amp. 833 Watt, VPitch 108 km/h, Eta 83,6%
18,5V - 18x10 Schulze Carbon V° M38, 5725 rpm, 31 Amp. 574 Watt, VPitch 87 km/h, Eta 85,8%
18,5V - 18x10 GM Scale VV° M38, 5645 rpm, 35 Amp. 653 Watt, VPitch 86 km/h, Eta 85,3%
18,5V - 18x13 GM VV° M38, 5460 rpm, 45 Amp. 836 Watt, VPitch 108 km/h, Eta 83,6%
18,5V - 18x13 GM Scale VV° M38, 5345 rpm, 51 Amp. 950 Watt, VPitch 106 km/h, Eta 82,3%
18,5V - 19x10 GM Scale VV° M38, 5532 rpm, 41 Amp. 765 Watt, VPitch 84 km/h, Eta 84,3%
18,5V - 20x13 GM CFK M37, 5196 rpm, 59 Amp. 1098 Watt, VPitch 103 km/h, Eta 80,4%

22,2V - 16x10 GM Scale VV° M38, 6809 rpm, 40 Amp. 899 Watt, VPitch 104 km/h, Eta 85,8%
22,2V - 17x13 GM Scale VV° M38, 6416 rpm, 62 Amp. 1367 Watt, VPitch 127 km/h, Eta 82,5%
22,2V - 17x13 GM VV° M38, 6592 rpm, 52 Amp. 1157 Watt, VPitch 131 km/h, Eta 84,2%
22,2V - 18x10 Schulze Carbon V° M38, 6766 rpm, 43 Amp. 950 Watt, VPitch 103 km/h, Eta 85,6%
22,2V - 18x10 GM Scale M38, 6584 rpm, 53 Amp. 1167 Watt, VPitch 100 km/h, Eta 84,1%
22,2V - 18x13 GM Scale VV° M38, 6258 rpm, 70 Amp. 1554 Watt, VPitch 124 km/h, Eta 80,8%
22,2V - 19x10 GM Scale VV° M38, 6507 rpm, 57 Amp. 1259 Watt, VPitch 99 km/h, Eta 83,4%
22,2V - 20x10 RF CFK M38, 6465 rpm, 59 Amp. 1308 Watt, VPitch 99 km/h, Eta 83,0%

30,0V - 13x10 Wide RF CFK M41, 9508 rpm, 38 Amp. 1150 Watt, VPitch 145 km/h, Eta 87,2%
30,0V - 14x10 RF CFK M36, 9415 rpm, 43 Amp. 1299 Watt, VPitch 143 km/h, Eta 87,1%
30,0V - 15x8 RF CFK M36, 9522 rpm, 38 Amp. 1128 Watt, VPitch 116 km/h, Eta 87,2%
30,0V - 16x8 RF CFK M36, 9127 rpm, 59 Amp. 1762 Watt, VPitch 111 km/h, Eta 85,9%
30,0V - 17x10 RF schmal CFK M38, 9273 rpm, 51 Amp. 1527 Watt, VPitch 141 km/h, Eta 86,6%

HINWEIS: Schubwerte gerechnet.

NOTE: shear values calculated.

Optional accessories:
• 4-plus high performance grease– Link.
• Wrench 17-2mm for Micro EDITION flange– Link.
• Suitable motor holder– Link.

Customers who bought this product have also bought: